Description
The Vapcell T60 is a high-performance 21700 lithium-ion cell engineered to deliver an exceptional balance of massive capacity and serious current output. With a 6000mAh typical capacity and a 40A maximum continuous discharge, it stands out as one of the few cells that can offer both extended runtime and high-drain capability without compromise . Whether you are running a high-output flashlight, a cordless power tool, or building a custom battery pack for an e-bike or drone, the T60 provides the stable, reliable power you need.
What truly sets the T60 apart is its ultra-low internal resistance of ≤5mΩ, which minimizes energy loss and heat generation even under heavy loads . It also supports a staggering 150A pulse discharge (2 seconds), giving your devices the burst of power needed for demanding startups or turbo modes . Available in Flat Top, Button Top, Nickel Tab, and Pre-wired configurations, with 2, 4, 6, 8, and 10 pack options to suit your project.
Important: The standard Flat Top version is an unprotected bare cell. Button Top and other modified versions are typically third-party processed and may be slightly longer. Please verify compatibility with your device before ordering.
Key Features
6000mAh High Capacity: Delivers extended runtime for flashlights, power banks, and portable electronics, significantly reducing the need for frequent recharging .
40A Maximum Continuous Discharge: Provides robust power for high-drain devices including power tools, e-bikes, and high-performance flashlights .
150A Pulse Discharge (2s): Massive burst capability for motor startups and turbo modes .
Ultra-Low Internal Resistance (≤5mΩ): Ensures efficient energy transfer, stable voltage under load, and minimal heat generation .
Long Cycle Life: Rated for at least 600 cycles with ≥70% capacity retention (1C charge / 5C discharge) .
Multiple Terminal Options: Flat Top for standard spring-contact devices and spot-welding; Button Top for devices requiring a raised positive terminal; Nickel Tab and Pre-wired for custom battery pack assembly.
Multiple Pack Options: Available in 2, 4, 6, 8, and 10 packs, ideal for multi-cell devices and DIY projects.
Parameters
| Parameter | Specification |
|---|---|
| Model | Vapcell INR21700-T60 |
| Cell Type | Rechargeable INR Lithium-Ion |
| Nominal Capacity | 6000mAh |
| Minimum Capacity | 5900mAh |
| Nominal Voltage | 3.60V |
| Nominal Energy | Approx. 21.6Wh |
| Charge Cut-off Voltage | 4.20V |
| Discharge Cut-off Voltage | 2.50V |
| Standard Charge Current | 3A (0.5C) |
| Max Charge Current | 12A (2C) |
| Max Continuous Discharge | 40A |
| Max Pulse Discharge | 150A (2 seconds) |
| Internal Resistance | ≤5mΩ (AC 1kHz) |
| Cycle Life | ≥600 cycles (to 70% capacity, 1C charge / 5C discharge) |
| Operating Temperature (Charge) | 0°C to 45°C |
| Operating Temperature (Discharge) | -20°C to 60°C |
| Dimensions | Approx. 21.4mm diameter x 70.5mm length |
| Weight | Approx. 73g |
| Top Type | Flat Top / Button Top / Nickel Tab / Pre-wired |
| Protection | Unprotected (standard Flat Top) |
| Pack Quantity | 2, 4, 6, 8, 10 Pcs |
Applications
Recommended For:
High-Output Flashlights: Powers high-lumen tactical and EDC lights with extended runtime and stable output .
Cordless Power Tools: Suitable for drills, impact drivers, and other high-drain tools when used in properly built battery packs with a BMS .
E-Bikes & E-Scooters: Ideal for building compact, high-capacity battery packs with fewer parallel cells needed .
Drones & UAVs: High capacity and pulse capability support demanding flight applications .
DIY Battery Packs: Perfect for custom projects requiring a balance of capacity and current output.
Not Recommended For:
High-Power Vaping (Sub-Ohm/Mechanical Mods): Vapcell explicitly states this cell is not intended for e-cigarette or vaping use .
Low-Power Devices: Solar lights, sensors, and standard USB power banks. The high current capability is wasted, and lower-cost cells are more economical.
18650-Only Devices: This is a 21700 cell (21.4mm x 70.5mm) and will not fit.
FAQ
Q1: What is the actual maximum continuous discharge?
A: The Vapcell T60 is rated for 40A maximum continuous discharge under the manufacturer's specified conditions . The pulse rating is 150A for 2 seconds .
Q2: Is this battery protected?
A: The standard Flat Top version is an unprotected bare cell . It is intended for use in devices with built-in protection or professionally assembled battery packs with an external BMS. Button Top and other modified versions may vary.
Q3: Can I use this battery for vaping?
A: No. Vapcell explicitly states that the T60 is not intended for e-cigarette or vaping use . For vaping, choose cells specifically rated and intended for that application.
Q4: What is the difference between Flat Top and Button Top?
A: Flat Top is the standard unprotected cell, ideal for spring-contact devices and spot-welding. Button Top has a raised positive terminal for devices with recessed compartments. Button Top versions are typically third-party processed and may be slightly longer—verify fit before ordering.
Q5: How should I store these cells?
A: Store at approximately 3.6V (40-50% charge) in a cool, dry place. Use non-conductive battery cases to prevent short circuits. Avoid storing fully charged or deeply discharged for extended periods .
Q6: How many batteries come in one pack?
A: This product is available in 2, 4, 6, 8, and 10 pack options. Please select your desired quantity from the dropdown menu before adding to cart.
Shipping and Returns
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Security
