What's in This Bundle
- 4x Panasonic NCR18650BD, 3,200mAh, Button Top
- 1x XTAR VC4SL 4-slot LCD USB-C charger
- 1x Type-C QC3.0 fast-charge cable, storage pouch, and manual (included with the charger)
A complete kit for anyone running a 4-cell device or building a small pack — four matched, genuine mid-drain cells paired with a charger that does more than just charge: it tests, monitors, and reports on each cell individually.
This listing is for Button Top. Looking for Flat Top? Click here to buy: Panasonic NCR18650BD Flat Top + XTAR VC4SL 4 Bundle.
Why This Pairing Makes Sense
The NCR18650BD is Panasonic's mid-drain follow-up to the NCR18650B — very similar capacity, but a genuinely higher discharge ceiling (10A continuous versus the B's 4.875A). That makes it a better fit for devices that need more than trickle-level current but don't require the extreme discharge rates of dedicated high-drain cells like the Samsung 25R or 30Q. Four cells bought together as a matched set means consistent capacity and internal resistance across the group, which matters for anything running cells in series or parallel. Button Top is the terminal type required by devices with spring-loaded battery contacts.
The XTAR VC4SL is a real step up from a basic charger: an LCD display showing live capacity, current, and internal resistance per slot, plus a capacity-test (grading) mode that charges, discharges, and recharges a cell to verify its actual capacity rather than just trusting the label. This cell's specs are already well-documented and consistent across independent sources, so the grading mode here is less about resolving conflicting claims and more about confirming your specific four cells are performing as a matched set before you build them into a pack.
Panasonic NCR18650BD — Battery Specs
| Parameter |
Value |
| Brand & Model |
Panasonic NCR18650BD |
| Capacity |
3,200mAh nominal (3,180mAh typical, 3,030-3,080mAh minimum depending on test conditions) |
| Nominal Voltage |
3.6V |
| Charge Voltage |
4.20V ±0.05V |
| Standard Charge Current |
0.909A (0.3C) |
| Max Charge Current |
1.5A |
| Charge Cutoff Current |
60.6mA (0.02C) |
| Discharge Cutoff Voltage |
2.5V |
| Max Continuous Discharge |
10A (3C) |
| AC Impedance |
≤35mΩ (1kHz) |
| Charge Temperature |
+10°C to +40°C |
| Discharge Temperature |
-20°C to +60°C |
| Cycle Life |
500+ cycles |
| Terminal Type |
Button Top |
| Protection Circuit |
None (unprotected cell) |
| Weight |
49.5g max |
| Cell Dimensions |
~18.5mm x 65.1mm |
This cell's specs are well-documented and consistent across independent lab testing and Panasonic's own datasheet — no meaningful discrepancy between sources on its 10A discharge rating, unlike some cells in this category. These are genuine cells verified against that documentation, not rewrapped or relabeled stock.
This listing is for Button Top. For Flat Top click here
XTAR VC4SL — Charger Specs
| Parameter |
Value |
| Input |
Type-C, QC3.0 (9V⎓2A) |
| Charging Current (CC) |
3A×1 / 2A×2 / 1A×4 / 0.5A×4 / 0.25A×4 — steps down automatically as more slots are occupied, or can be manually adjusted within what the slot count allows |
| Charging Method |
3-stage charging (trickle → constant current → constant voltage), 4 independently monitored slots, dynamic power allocation based on input power available |
| Cut-off Voltage |
4.2V ±0.05V (Li-ion) / 1.45V ±0.1V (Ni-MH/Ni-Cd) |
| Cut-off Current |
≤120mA |
| Operating Temperature |
0°C to 40°C |
| Dimensions |
L156mm x W115mm x H35mm |
| Net Weight |
212g |
| Display |
Color LCD — press Mode to cycle between capacity, current, and internal resistance readouts per slot in real time |
| Special Modes |
Capacity/grading mode (charge → discharge → recharge cycle to verify true capacity), storage mode (charges or discharges cells to their rated storage voltage to extend battery life), standard charge mode |
| Compatible Cell Sizes |
3.6V/3.7V Li-ion: 10440, 14500, 14650, 16340, 17335, 17500, 17670, 18350, 18490, 18500, 18650, 18700, 20700, 21700, 22650, 25500, 26650, flat-top 32650. 1.2V Ni-MH/Ni-Cd: AAA, AA, A, SC, C. Supports protected 20700/21700 cells; spring-loaded slots can also fit two 32650s and two 18650s at once |
| Safety |
Reverse polarity protection (displays "Err," shows 0V, and stops automatically), auto cut-off when fully charged, multiple charge protections |
A realistic note on charge time: the VC4SL's 1A-per-slot rate (with all four bays occupied and the QC3.0 adapter active) sits comfortably between this cell's standard (0.909A) and max (1.5A) charge current specs — a sensible, safe rate. Expect a full charge in roughly 3.5-4 hours for all four cells at once.
Why the Capacity Test Mode Matters for a 4-Pack
Buying four cells at once is exactly the scenario where verifying consistency pays off, even for a well-documented cell like this one. The VC4SL's grading mode runs each cell through a charge-discharge-recharge cycle and reports its actual measured capacity — so instead of just trusting that all four cells hit their rated ~3,180mAh, you can check for yourself before building them into a series or parallel pack. Cells with a wider gap during testing are worth flagging rather than mixing into a tight pack build.
Where This Bundle Actually Fits
-
Flashlights running moderate-to-high output modes — enough current headroom for more than just low modes
-
Portable fans, radios, and remote controls that draw more than trickle current
-
Power tool and e-bike packs where 10A per cell in parallel configurations is sufficient
-
DIY packs (2S2P, 4S, etc.) needing a step up in discharge capability over pure energy-focused cells like the NCR18650B
Not the right choice for sub-ohm mechanical mods, or anything regularly demanding more than 10A per cell — for those, a dedicated high-drain cell like the Samsung 25R or 30Q is a better match.
Things Worth Knowing Before You Use This Kit
-
This is an unprotected cell. The charger enforces its own voltage and current cutoffs, but your device still needs to handle discharge-side protection.
-
Don't mix these cells with older ones you already own, even if they're also NCR18650BD — that's exactly what the grading mode is for, if you want to check compatibility before combining batches.
-
10A is a real ceiling, not a conservative underrating. Pushing this cell toward higher current than it's rated for will cause excess heat and accelerated wear.
Frequently Asked Questions
Can this charger really tell me if a cell is underperforming? Yes — the grading/capacity test mode charges, discharges, and recharges a cell while measuring the actual capacity delivered, rather than relying on the printed rating. It's a genuine diagnostic tool, not just a charge indicator.
How is the BD different from the standard NCR18650B? Capacity is similar (3,200mAh for the BD versus 3,400mAh for the B), but the BD has a meaningfully higher discharge ceiling — 10A continuous versus 4.875A for the standard B. If your device needs more current than the B can deliver but doesn't need a dedicated high-drain cell, the BD is the middle-ground option.
Do I need to charge all four cells at once? No — each of the four slots operates independently, so you can charge one, two, three, or four cells at a time, and mix different cell sizes or even NiMH batteries across the slots if needed.
What happens if I insert a cell backwards? The display shows "Err" for that slot and the voltage reading drops to 0 — the charger stops working on that slot automatically rather than attempting to charge.
In stock now. This bundle ships as a matched set of four genuine Panasonic NCR18650BD Button Top cells with a verified XTAR VC4SL charger — ready for moderate-drain flashlights, tools, and general electronics out of the box.
