Description
Fuel your most demanding gear with the EVE 30P, a high-drain 18650 cell that combines a solid 3000mAh capacity with a true 30A continuous discharge. This 10-pack is the go-to power upgrade for cordless tools, high-wattage mods, FET-driven flashlights, RC racers, and e-bike battery packs. The flat top design fits all standard spring-contact devices and makes spot-welding a breeze for custom builds. With low internal resistance and proven consistency, the 30P delivers raw, reliable power when your device needs maximum output.
Key Features
-
30A Continuous High Drain – True 30A rating handles sub-ohm coils, power tool surges, and turbo flashlight modes with stable voltage and minimal sag.
-
3000mAh Balanced Capacity – Optimized for high-drain devices. More runtime than typical 2500–2600mAh cells while still delivering extreme current.
-
Flat Top Design – Universally compatible with 18650 spring-contact chargers, flashlights, and battery trays. Flat positive terminal simplifies spot-welding nickel strips.
-
10-Pack Bulk Value – Perfect for rebuilding tool battery packs, stocking up for your rotation, or assembling a high-current RC or e-bike pack.
-
EVE Grade A Cell – Manufactured with strict quality control for consistent performance, low self-discharge, and built-in safety features (PTC/CID).
Parameters
Applications
Recommended For
-
Cordless Power Tools: Impact drivers, drills, circular saws — rebuild your packs for stronger torque and longer run times. Always use a BMS.
-
High-Power Vaping: Mechanical mods and regulated devices running sub-ohm builds safely within 30A. Enjoy dense clouds with minimal voltage drop.
-
High-Output Flashlights: FET-driven or multi-emitter torches that pull 15–25A on turbo. The 30P keeps brightness constant.
-
RC Cars, Boats & Airsoft: Rapid acceleration and continuous fire demand high burst current — the 30P delivers.
-
E-Bike & E-Scooter Packs: Use in multi-parallel configurations (e.g., 3P or 4P) so each cell’s load stays within 30A. 3000mAh offers a good balance of weight and range.
-
DIY High-Current Projects: Spot welders, portable jump starters, and any pack requiring affordable, reliable high-drain cells.
Not Recommended For
-
Low-Power Long-Runtime Devices: Solar lights, sensors, or clocks. Choose a 3500mAh 10A cell (e.g., Samsung 35E) for maximum economy and runtime.
-
Single-Cell E-Bike Applications: One cell cannot provide sufficient voltage or current; always build a proper series/parallel pack with a BMS.
-
Devices Requiring Button Tops: These are flat top cells. Use a magnetic spacer if needed, ensuring it does not cause short circuits.
FAQ
Q: Can I build an e-bike battery with these?
A: Yes, but you must connect multiple cells in series and parallel to achieve the required voltage and current. A single cell cannot power an e-bike. For a 36V pack, use a 10S configuration with enough parallel strings (e.g., 10S3P) so that each cell carries no more than 30A. Always use a quality BMS.
Q: Is this battery protected?
A: No, the EVE 30P is an unprotected flat top cell. This is standard for high-drain applications. For multi-cell packs, you must install an external BMS rated for at least 40A.
Q: How does the 30P compare to other 3000mAh 30A cells?
A: It competes directly with cells like the Samsung 30Q (15A) and Sony VTC6 (20A), but the 30P offers a higher continuous current rating of 30A while maintaining 3000mAh capacity. It’s an excellent value for high-drain applications.
Q: How should I store these cells when not in use?
A: Store at 3.6–3.7V (about 40–50% charge) in a cool, dry place. Use non-conductive battery cases to prevent accidental shorts. Avoid storing fully charged or fully discharged for long periods.
