Description
Maximize your runtime with the Vapcell F50, a 21700 cell that delivers a solid 5000mAh capacity with a stable 10A continuous discharge. This 2-pack provides approximately 43% more energy than a standard 3500mAh 18650, making it the ideal power solution for devices where endurance matters most: LED flashlights, high-capacity USB power banks, solar energy storage, and portable power stations. The flat top design ensures broad compatibility with spring-loaded contacts and simplifies spot-welding for custom battery packs. With excellent cycle life and Vapcell's trusted cell matching, the F50 keeps your devices running longer between charges—perfect for off-grid living, extended trips, and everyday reliability.
Key Features
-
5000mAh High Capacity – Provides approximately 43% more energy than a standard 3500mAh 18650 cell. Ideal for applications where extended runtime between charges is the top priority.
-
10A Continuous Discharge (CDR) – Stable, reliable power for regulated LED flashlights, USB power banks, solar storage systems, and similar medium-drain devices. Sufficient for bright flashlight modes and fast-charging circuits.
-
Flat Top Design – Universally compatible with all standard 21700 spring-contact chargers, flashlights, and battery trays. The flat terminal is ideal for spot-welding nickel strips in custom battery packs.
-
Long Cycle Life – Retains over 80% of initial capacity after 500 charge/discharge cycles under recommended conditions, reducing long-term replacement costs.
-
2-Pack Convenience – Build a 10000mAh power bank with two cells in parallel, keep a spare for your flashlight, or start your solar storage project with high-density cells.
-
Vapcell Quality Control – Each cell is tested and matched for consistent capacity and low internal resistance, ensuring reliable performance across the pack.
Parameters
Applications
Recommended For
-
High-Output 21700 LED Flashlights: Perfect for medium to high modes drawing 2–8A. The 5000mAh capacity provides hours of steady illumination for camping, hiking, search and rescue, and professional use.
-
High-Capacity USB Power Banks: Build a 10000mAh power bank with just two cells in parallel. The 10A rating comfortably supports 18W–30W USB-C PD fast charging. Great for daily carry and travel.
-
Solar Energy Storage & Off-Grid Systems: Low-current, long-duration energy storage. The 5000mAh capacity maximizes stored energy per cell for solar light banks and small off-grid installations.
-
Portable Fans & Outdoor Gadgets: Enjoy hours of cooling or illumination on a single charge.
-
Wireless Security Cameras & Smart Doorbells (21700 Compatible): Ultra-low standby consumption with months of operation between charges.
Not Recommended For
-
High-Power Vaping / Mechanical Mods: These require 20–35A continuous discharge. The F50 is a pure high-capacity cell, not a high-drain cell. Use Vapcell T42 (35A) or K40 (30A) instead.
-
Cordless Power Tools: Drills, saws, and impact drivers demand 20–40A continuous current, far beyond the 10A CDR.
-
RC Cars, Drones & High-Drain Models: These require 20–30A+ continuous current. The F50 is engineered for capacity, not extreme current.
-
Single-Cell E-Bike Applications: 10A is insufficient for most e-bike motors. A multi-parallel configuration with a BMS is required.
FAQ
Q: How does the F50 compare to the F56 or S50?
A: The F50 offers 5000mAh with a 10A CDR—the most affordable entry in Vapcell's high-capacity 21700 lineup. Compared to the F56 (5600mAh/12.5A), it has slightly less capacity and current but at a better value. Compared to the S50 (5000mAh/15A), it has the same capacity but a lower CDR. Choose the F50 if your device draws under 10A and you want the best value high-capacity cell.
Q: Can I use this battery for vaping or power tools?
A: No. Vaping devices and power tools require high continuous currents (typically 20–40A). The F50's CDR is 10A. Using it in such devices will cause severe voltage sag, rapid overheating, and potential battery damage. For these applications, use dedicated high-drain cells like Vapcell T42 or K40.
Q: What devices are best suited for this cell?
A: Any device drawing under 10A where maximum runtime is the priority: 21700 LED flashlights, high-capacity power banks, solar storage systems, portable fans, and wireless security cameras. If you want the longest runtime for your money, this is an excellent choice.
Q: Can I build a power bank with these?
A: Absolutely. Two F50 cells in parallel provide approximately 10000mAh—enough to fully charge most smartphones about two times. The 10A per cell rating easily supports 18W–30W USB-C PD fast charging.
Q: How should I store these cells when not in use?
A: Store at 3.6–3.7V (approximately 40–50% charge) in a cool, dry place. Use non-conductive battery cases to prevent accidental short circuits. Avoid storing fully charged or deeply discharged for extended periods.
