Why This Bundle
The LG M50LT is a long-life variant of the M50 family, carrying the same 5000mAh-class capacity while offering roughly double the rated cycle life (approximately 1000 cycles) compared to the standard M50T — making it a strong pick for e-bikes, ESS packs, and other applications where you'll be cycling the battery repeatedly over years of use. A set this capable deserves a charger that can handle every cell at once while keeping close watch on their health. This bundle pairs 4 genuine LG INR21700-M50LT batteries with the NITECORE UMS4, a QC-enabled 4-slot charger with a detailed LCD display, independent bay control, and multiple layers of protection — ready to use straight out of the box.
LG INR21700-M50LT Specifications
| Item |
Spec |
| Model |
LG INR21700-M50LT (Flat Top) |
| Nominal Capacity |
5000mAh (approx. 4800mAh typical) |
| Nominal Voltage |
~3.6–3.63V |
| Max Charge Voltage |
4.20V |
| Standard Charge Current |
~1.44A |
| Max Charge Current |
~3.36–3.4A |
| Max Continuous Discharge |
~7.275A (60°C thermal cutoff) |
| Discharge Cutoff Voltage |
2.5V |
| Cycle Life |
~1000 cycles (approx. 2× the standard M50T) |
| Chemistry |
Li-ion, energy-focused, long-cycle-life formulation |
| Cell Size |
21700 (approx. Φ21.15–21.44mm × 70.3–70.4mm, approx. weight 67.7–69.25g) |
| Terminal Type |
Flat Top only |
| Protection Circuit |
None (unprotected cell) |
| Typical Use |
E-bikes, ESS modules, industrial devices, long-runtime and long-cycle-life battery pack builds |
Note: This is an energy/runtime-focused cell, not a high-drain one — it's built for applications that need maximum capacity and long-term cycle durability rather than extreme continuous current.
This is an unprotected cell — avoid mixing with batteries of a different brand, model, or charge state, and inspect the wrap for damage before every use to prevent short circuits.
The Charger: NITECORE UMS4
-
USB-C input with QC support: up to 4,000mA total output; up to 3,000mA on a single bay with a QC adapter — well beyond the M50LT's ~1.44A standard charge current, making single-bay charges considerably faster
-
QC Mode output: 3,000mA×1 / 2,000mA×2 / 1,000mA×4 — Standard Mode: 2,000mA×1 / 1,000mA×2 / 500mA×4
-
Independent 4-bay control: charge and monitor up to 4 batteries separately, with each bay unaffected by the others
-
Detailed real-time LCD display: shows battery health (Good/Poor), internal resistance, charging current, voltage, battery type, charged capacity, charging time, cut-off voltage, and charging mode
-
3 automatic charging modes: CC, CV, and -dV/dt, selected automatically based on battery type and charge level
-
Manual adjustment: set charging voltage and current for specialized battery types
-
Safety features: automatic internal resistance detection, reverse-polarity and short-circuit protection, overtime charging protection, and over-discharged battery activation/restoration
-
Fire-retardant PC/ABS housing with built-in temperature regulation
-
Universal power input: works with wall adapters, power banks, and solar panels via USB-C
NITECORE UMS4 – Supported Battery Types & Voltage
Compatible with 3.6V/3.7V Li-ion, 3.8V Li-ion, 3.2V LiFePO4, and 1.2V Ni-MH/Ni-Cd batteries, including the LG M50LT (21700) in this bundle:
IMR/Li-ion/LiFePO4: 10440, 14500, 14650, 16500, 16340 (RCR123), 16650, 17350, 17500, 17650, 17670, 17700, 18350, 18490, 18500, 18650, 18700, 20700, 21700, 22500, 22650, 25500, 26500, 26650, 26700 Ni-MH/Ni-Cd: AA, AAA, AAAA, C, D
Output current: up to 3,000mA per bay (QC mode) / 4,000mA total
Compatibility Notes
The UMS4 uses spring-loaded contacts and its bays are sized to comfortably fit 21700 cells like the M50LT. Compared to a basic dual-slot travel charger, the UMS4's much higher per-bay output charges a large 5000mAh-class cell like this considerably faster.
Note: With all 4 bays occupied, each will charge more gently at up to 1,000mA (QC mode) or 500mA (standard mode) — a reasonable, safe charging pace for four large-capacity cells at once, though it will still take a few hours for a full charge given the M50LT's capacity.
What's Included
- LG INR21700-M50LT Battery × 4
- NITECORE UMS4 4-Bay Charger × 1
- USB-C Charging Cable × 1
- User Manual × 1
Safety Tips
- Store batteries in a proper case, keeping them away from loose metal objects to prevent short circuits
- Never disassemble, puncture, burn, or submerge the batteries
- Charge only with a genuine, compatible charger such as the NITECORE UMS4
- The M50LT is an unprotected cell intended for compatible, purpose-built devices such as e-bikes, ESS modules, and engineered battery packs
- Never discharge below 2.5V or charge above 4.2V
FAQ
Q: Can the NITECORE UMS4 charge LG M50LT batteries safely? A: Yes. The UMS4 automatically detects Li-ion chemistry and applies the correct charging voltage (4.2V) and current for M50LT cells, with real-time monitoring on its LCD display, and its higher per-bay output charges these large-capacity cells noticeably faster than a basic low-current charger.
Q: What makes the M50LT different from other M50-family cells? A: The M50LT is specifically built for longer cycle life — roughly 1000 cycles, about double the rated cycle life of the standard M50T — while keeping the same general 5000mAh-class capacity and moderate discharge profile.
Q: Is the M50LT a high-drain cell? A: No. It's built primarily for energy density, runtime, and long-term cycle durability, with a moderate continuous discharge rating around 7.275A (60°C cutoff). It's better suited to e-bikes, ESS, and long-runtime packs than to devices demanding extreme continuous current.
Q: Can I charge all 4 batteries at the same time? A: Yes. The UMS4 has 4 independent bays and can charge all 4 cells simultaneously — up to 1,000mA per bay in QC mode, or 500mA per bay in standard mode, when all 4 slots are used at once.
Q: Will 21700 batteries fit properly in the UMS4? A: Yes. The UMS4's bays and spring-loaded contacts are sized to accommodate 21700 cells like the M50LT without any adapter.
Q: How do I know if an M50LT battery is degraded? A: The UMS4's LCD display shows battery health as "Good" or "Poor" along with internal resistance readings, making it easy to spot cells that have aged or lost performance.
Q: Can I power the UMS4 with a power bank while traveling? A: Yes. The UMS4 has a USB-C input and works with wall adapters, power banks, and solar panels.
Q: What's in the box? A: 4 LG INR21700-M50LT batteries, 1 NITECORE UMS4 charger, a USB-C charging cable, and a user manual.
