Delipow 5000mAh 3.6V 21700 Flat Top Battery – 30A High Drain for Turbo Flashlights, Power Tools & RC Models

Product Description

The New Benchmark: 5000mAh Capacity Meets 30A Brutal Discharge
Delipow has rewritten the rules of 21700 cell design with this remarkable flat‑top battery. It fuses a genuine 5000mAh capacity — storing approximately 18.5 watt‑hours of energy — with a ferocious 30A continuous high‑drain capability. This means you no longer have to choose between a cell that lasts forever but sags under load, and a cell that delivers huge current but dies after a few minutes. The Delipow 5000mAh 30A flat‑top gives you both: marathon runtime for your devices and the instantaneous, sustained current that turbo flashlights, cordless power tools, and high‑performance RC models demand.

Flat‑Top and Unprotected — The Enthusiast’s Blueprint
This cell is purpose‑built as an unprotected, flat‑top 21700. We deliberately omit the external protection PCB to keep the overall length at exactly 70.0mm, the industry standard for 21700‑compatible devices. The flush positive terminal slides seamlessly into the tightest flashlight tubes — the kind found in enthusiast lights from Noctigon, Emisar, and custom hot‑rod builds — and mates perfectly with the pogo‑pin contacts and recessed flat PCB pads used in power tool battery packs and RC battery trays. Removing the protection PCB also eliminates an extra layer of electrical resistance, which is critical for high‑drain applications: at 30A, every milliohm counts. The result is a cell that delivers its full rated current without the voltage‑sapping bottleneck of a protection circuit. Naturally, this design expects you to pair it with a quality charger that terminates at exactly 4.2V, and to install it only in devices that have built‑in low‑voltage cutoff — a feature already present in virtually all modern turbo flashlights, brushless power tools, and RC electronic speed controllers. The cell’s own built‑in PTC thermistor, resealable safety vent, and CID provide passive layers of protection.

Why 30A and 5000mAh Is a Game‑Changer
Let's put these numbers into perspective. In a FET‑driven turbo flashlight pulling 20–30A — think Emisar D4SV2, Noctigon K1, or a multi‑emitter SBT90.2 build — the Delipow cell holds its voltage rock‑solid, keeping the LEDs at full blaze for sustained bursts without premature step‑down. In a cordless drill or impact driver, the 30A discharge supplies the instantaneous torque required to drive long screws into hardwood or punch through sheet metal, while the 5000mAh capacity allows you to work through dozens of fasteners before reaching for the charger. In a 1/8 scale RC monster truck or a high‑speed drone, a 2S or 3S pack built from these flat‑top cells delivers relentless acceleration and top‑end speed, with enough capacity to complete a full race heat or an extended freestyle session. Even in high‑power portable fans or DIY power banks, the combination of vast energy reserves and high current capability means you can run multiple devices or fast‑charge laptops without voltage collapse.

Advanced Chemistry, Long‑Term Reliability
Delipow employs a high‑stability NMC (Nickel‑Manganese‑Cobalt) formulation that delivers a flat 3.6V nominal discharge curve. With an internal resistance of only ≤18mΩ, voltage sag at the full 30A is a mere 0.54V — meaning your devices stay in regulation, your beams stay bright, and your motors keep their torque right down to the cutoff. The cell is rated for over 500 full charge/discharge cycles while retaining at least 70% of its initial capacity. Its low self‑discharge rate means you can store spare cells at the recommended 3.6–3.7V for months, and they will still wake up with most of their charge intact. Built‑in passive safety features — a PTC thermistor that increases resistance during over‑current, a resealable safety vent that releases gas if internal pressure builds dangerously, and a CID (Current Interrupt Device) that physically disconnects the internal electrode under extreme pressure — give you confidence in every use.

Key Features

• 5000mAh Capacity + 30A Continuous High Drain
  Class‑leading combination of ultra‑high capacity and serious high‑drain performance. Delivers extended runtime for flashlights, tools, and RC models without voltage sag.

• Unprotected Flat‑Top Design
  Standard 70.0mm length fits all 21700‑compatible devices. The flush positive terminal is essential for tight battery tubes, pogo‑pin contacts, and spot‑welded packs. Eliminates added resistance and length for maximum power delivery.

• Stable NMC Chemistry & Flat Discharge
  Maintains a consistent 3.6V nominal voltage from 4.2V down to 2.5V. Light output, motor RPM, and tool torque stay predictable throughout the discharge cycle.

• Ultra‑Low Internal Resistance (≤18mΩ)
  Voltage drop at 30A is only ~0.54V. Keeps heat generation low, efficiency high, and devices in regulation longer.

• 500+ Cycle Life & Low Self‑Discharge
  Recharge over 500 times with minimal capacity fade. Holds its charge for months when stored at 3.6–3.7V — always ready for action.

• Multi‑Layered Passive Safety
  Built‑in PTC thermistor, resealable safety vent, and CID protect against over‑current, over‑pressure, and short circuits.

• Rugged Nickel‑Plated Steel Can
  Corrosion‑resistant and impact‑resistant. Designed to handle the vibrations, drops, and harsh conditions of power tools, RC vehicles, and outdoor environments.

Technical Parameters

Applications

1. Turbo Flashlights & High‑Lumen Hot‑Rods
For FET‑driven, multi‑emitter, or custom SBT90.2 flashlights that pull 20–30A on turbo, this flat‑top cell delivers the instantaneous current needed for blinding brightness without early step‑down. The flush terminal is mandatory for the ultra‑tight battery tubes found in enthusiast lights.

2. Cordless Power Tools (Rebuilds & Upgrades)
Replace worn‑out cells in drills, impact drivers, circular saws, and angle grinders. The 30A continuous discharge handles the startup spikes and sustained loads of professional tools, while the 5000mAh capacity provides excellent runtime. The flat‑top design is the standard for welding into 5S1P or 5S2P packs for 18V/20V platforms.

3. RC Models — Cars, Trucks, Boats & Drones
Build a 2S or 3S Li‑ion pack for 1/10 or 1/8 scale vehicles, or a 4S/6S pack for high‑power drones. The 30A output feeds brushless motors with relentless punch, and the flat‑top terminals weld cleanly into stick packs, saddle packs, and drone battery configurations.

4. High‑Power Portable Fans & Cooling Devices
Large portable fans that draw 5–15A on high speed run powerfully and consistently with this cell. The massive 5000mAh capacity provides hours of strong airflow, ideal for job sites, camping, and emergency cooling.

5. DIY High‑Current Power Banks & Portable Inverters
Build a high‑capacity power bank that can fast‑charge multiple devices simultaneously, or a portable inverter station for camping and emergency use. The flat‑top cell is ready for spot welding into series/parallel configurations.

6. Professional & Industrial Equipment
Portable barcode scanners, thermal printers, medical devices, and other equipment that requires both high current pulses and long runtime are well‑served by this Delipow cell.

FAQ

Q1: Is this cell really capable of 30A continuously?
A: Yes. The Delipow 5000mAh 21700 is rated for 30A continuous discharge. It can also pulse up to 40A for short bursts (under 5 seconds). We specify the honest continuous rating so you know exactly what to expect during sustained high‑drain use.

Q2: Why is this battery unprotected and only available as a flat top?
A: Delipow designed this cell specifically for high‑drain applications. A protection PCB would add unwanted length (preventing fitment in tight tubes) and increase internal resistance (choking current at peak loads). A button top would similarly interfere with tight flashlight tubes and complicate spot welding. The flat‑top, unprotected design is the universal standard for enthusiast flashlights, power tool packs, and RC models. It is completely safe when used with a quality 4.2V charger and in devices that have built‑in low‑voltage cutoff — which includes virtually all modern turbo flashlights, brushless tools, and RC ESCs. The cell's built‑in PTC, vent, and CID provide passive safety layers.

Q3: Will this flat‑top cell work in a device that originally used a button‑top battery?
A: It depends on the device. Many high‑performance flashlights and power tool packs are designed specifically for flat‑top cells, which offer lower resistance and a more compact fit. If your device has a spring‑loaded positive contact and a physical reverse‑polarity ring, it may require a button top to make electrical contact. Check your device manual: if it specifies “flat top” or “unprotected flat top,” this cell is the correct choice. If not, you may need a button‑top cell instead.

Q4: Can I use this 21700 cell in a device designed for 18650?
A: No. A 21700 cell (21mm diameter × 70mm length) is physically larger than an 18650 (18mm × 65mm). Your device must explicitly support the 21700 form factor. Never force a 21700 into an 18650 tube, as this can damage both the cell and the device.

Q5: How hot does the battery get at 30A continuous?
A: With an ultra‑low internal resistance of ≤18mΩ, heat generation is relatively modest. The cell will become warm — typically reaching around 65–75°C after several minutes of sustained 30A — but remains within safe operating limits. Allow the cell to cool between heavy discharge runs for best longevity.

Q6: Can I charge this battery at 5A?
A: Yes, 5A (1C) is the maximum charge current. However, for optimal cycle life, we recommend the standard 2.5A (0.5C) charge rate. Fast charging generates more heat and may slightly accelerate long‑term capacity fade.

Q7: How should I store spare cells?
A: Keep them in a plastic battery case or silicone sleeve, away from metal objects and moisture. For storage longer than one month, bring the voltage to about 3.6–3.7V (roughly 50% charge). Check every 3 months and recharge if the voltage drops below 3.0V. Never store a fully depleted cell.

Q8: Can I bring this battery on an airplane?
A: Yes. At approximately 18.5Wh, it is well under the 100Wh IATA limit for carry‑on luggage. Insulate the terminals with tape or a plastic case and carry the cells in your hand luggage.