Description
Get a meaningful runtime upgrade without the premium price with the Vapcell F38, a high-capacity 18650 cell that delivers an impressive 3800mAh with a stable 10A continuous discharge. This 2-pack sits perfectly between standard 3500mAh cells and flagship 4000mAh models—providing approximately 9% more runtime than 3500mAh cells at a more accessible value. Designed for LED flashlights, high-capacity power banks, portable fans, solar lights, and DIY battery projects, the F38 is the smart choice for users who want tangible extra endurance without paying for maximum capacity. The flat top design ensures broad compatibility and simplifies spot-welding for custom packs. With Vapcell's trusted cell matching and excellent cycle life, the F38 keeps your devices running longer between charges.
Key Features
-
3800mAh Ultra-High Capacity – Delivers approximately 9% more runtime than standard 3500mAh cells, and about 52% more energy than 2500mAh cells. The ideal middle ground between standard and maximum capacity.
-
10A Continuous Discharge – Provides stable, reliable power for most regulated LED flashlights, USB power banks, portable fans, and similar medium-drain devices without overheating or voltage sag.
-
Flat Top Design – Universally compatible with all standard 18650 spring-contact chargers, flashlights, and battery trays. The flat terminal is ideal for spot-welding nickel strips in custom battery packs.
-
Long Cycle Life – Retains over 80% of initial capacity after 500 charge/discharge cycles under recommended conditions, reducing long-term replacement costs.
-
2-Pack Convenience – Build a compact 7600mAh power bank with two cells in parallel, keep a charged spare for your flashlight, or power your DIY project with confidence.
-
Vapcell Quality Control – Each cell is tested and matched by Vapcell using authentic high-quality cells from major manufacturers, ensuring consistent capacity and low internal resistance.
Parameters
Applications
Recommended For
-
LED Flashlights & Headlamps: The perfect upgrade for users wanting more runtime than 3500mAh cells without jumping to the highest price tier. On medium modes, the extra 300mAh over standard cells provides noticeably longer illumination.
-
High-Capacity USB Power Banks: Build a 7600mAh power bank with just two cells in parallel. The 10A rating comfortably supports 18W–30W USB-C PD fast charging. Great for daily carry and weekend trips.
-
Portable Fans & Cooling Devices: Neck fans, handheld fans, and desk fans benefit from the extended runtime. Perfect for hot climates and outdoor events.
-
Solar Garden Lights & Street Lights: Low-current, all-night operation. The 3800mAh capacity ensures consistent brightness from dusk until dawn.
-
Wireless Security Cameras & Smart Doorbells: Ultra-low standby consumption with months of operation between charges. The extra capacity over 3500mAh cells makes a practical difference.
-
DIY IoT & Sensor Projects: Arduino, ESP32, and Raspberry Pi portable projects benefit from the generous energy reserve for extended field deployment.
-
Medical Devices & Portable Monitors: Reliable, stable power for equipment requiring uninterrupted operation within 10A limits.
Not Recommended For
-
High-Power Vaping / Mechanical Mods (>10A): This is a 10A continuous discharge cell. Sub-ohm builds and high-wattage regulated mods require 15–35A continuous. Using the F38 will cause severe voltage sag, rapid overheating, and potential battery damage.
-
Cordless Power Tools: Drills, saws, and impact drivers demand 15–40A continuous current. Use dedicated high-drain cells such as Vapcell K30 (30A) instead.
-
RC Cars, Drones & High-Drain Models: These require 20–30A+ continuous current. The F38 is engineered for maximum capacity, not extreme current delivery.
-
FET-Driven Flashlights Exceeding 10A on Turbo: If your light's turbo mode pulls over 10A, select a higher-drain cell to avoid performance loss and potential damage.
FAQ
Q: How does the 3800mAh F38 compare to 3500mAh and 4000mAh cells?
A: The F38 sits right between them. It delivers approximately 9% more runtime than a 3500mAh cell, while typically being more affordable than the 4000mAh flagship models. In practical terms, a flashlight that runs for 4 hours on high with a 3500mAh cell will run about 4 hours and 20 minutes with the F38. It is the ideal sweet spot for users who want a meaningful upgrade without paying the maximum premium.
Q: Can I use this battery for vaping?
A: No, not for high-power vaping. The F38 has a 10A continuous discharge rating (CDR). Most sub-ohm builds and high-wattage regulated mods require 15–35A continuous. Using the F38 will cause severe voltage sag, rapid overheating, and potential damage. For vaping, choose a dedicated high-drain cell like the Vapcell K30 (30A continuous).
Q: What devices are best suited for this cell?
A: Any device drawing under 10A where extended runtime is valued: LED flashlights on medium/high, USB power banks, portable fans, solar lights, wireless security cameras, smart doorbells, and long-running IoT sensor nodes. It is perfect for users who find 3500mAh just slightly insufficient but do not need the absolute maximum 4000mAh capacity.
Q: What cell is inside the Vapcell wrap? Is it genuine?
A: Vapcell is a reputable rewrapper known for using authentic high-quality cells from major manufacturers. The F38 is based on a 3800mAh cell core. Every batch is tested for capacity and internal resistance to ensure consistency and performance.
Q: Can I build a power bank with these?
A: Absolutely. Two F38 cells in parallel provide approximately 7600mAh—enough to fully charge most smartphones about 1.5–2 times. The 10A per cell rating easily supports 18W–30W USB-C PD fast charging. Combined with a quality power bank enclosure, it is an excellent compact high-capacity DIY power bank solution.
Q: How should I store these cells when not in use?
A: Store at 3.6–3.7V (approximately 40–50% charge) in a cool, dry place. Use non-conductive battery cases to prevent accidental short circuits. Avoid storing fully charged or deeply discharged for extended periods.
